
Common Liquid Level Gauge Principles and Applications
Common liquid level sensors and transmitters mainly include the following types.
1. Pressure-type level gauge: available in bottom-mounted and submersible versions. It measures the liquid level by measuring the pressure at the bottom of the liquid: P = h × γ, where γ is the specific gravity. If the side or bottom of the tank allows installation, a bottom-mounted version (a standard pressure transmitter) is usually selected. For culverts, wells, pools and similar applications where bottom mounting is not possible, a submersible level transmitter is used: the sensor is lowered to the bottom of the liquid and the atmospheric pressure is introduced through a vented cable for compensation.
2. Magnetic flap level gauge: available in reed-switch and magnetoresistive versions. A magnetic float inside the tube closes the nearest reed switch or magnetoresistive element, and the liquid level is determined from the resistance corresponding to the closed position.
3. Ultrasonic level gauge: measures the time for an ultrasonic pulse to travel to the surface and back. Its disadvantage is that bubbles, dust and similar substances also reflect the ultrasound, causing measurement errors.
4. Radar level gauge: measures the time for a radar electromagnetic wave to travel to the surface and back. Radar waves have strong penetrating power and can pass through bubbles, so the anti-interference capability is strong; the disadvantage is the relatively high price.
5. Float level gauge: the principle is similar to the magnetic flap gauge, but the float is outside the stainless-steel tube and the reed switch or magnetoresistive element is inside the tube. It is intuitive but not suitable for media with high viscosity or small particles.
6. Tuning-fork level gauge: a pair of piezoelectric crystals on the fork base makes the fork vibrate at a certain resonance frequency. When the fork contacts the measured medium, the frequency and amplitude change; the intelligent circuit detects and processes these changes and converts them into an electrical signal.
7. RF admittance level gauge: RF admittance is a level measurement technology developed from capacitive measurement. It resists material buildup and is more reliable, accurate and adaptable than capacitive types. Admittance is the reciprocal of impedance and is formed by resistance, capacitance and inductance. Based on the capacitive level gauge circuit, the RF admittance gauge adds an oscillator buffer circuit and an AC conversion chopper drive circuit. Through a unique circuit and sensor structure, the admittance change is converted into an electrical signal. It is maintenance-free, has strong anti-interference capability and can overcome the influence of steam, foam and stirring on measurement.
8. Magnetostrictive level gauge: when the sensor operates, the circuit excites a pulse current in the waveguide wire. As the current propagates along the wire, it generates a pulsed current magnetic field around the wire. A float is arranged outside the measuring rod and can move along the rod; the position of the float is determined by measuring the time difference of the returned pulse, giving the liquid level.
